About Fibrepulse Fibre Optic Products Fibrepulse Clients Fibre Optic Technical Fibrepulse Contact
EC Fibre Optic FC Fibre Optic LC Fibre Optic MU Fibre Optic SC Fibre Optic
ST Fibre Optic E2000 Fibre Optic MT-RJ Fibre Optic MPO Fibre Optic Fibre Optic Attenuators
Fibre Optic PM Assemblies Custom Fibre Optic Fibre Optic Quote

E-2000 SINGLEMODE FIBRE OPTIC ASSEMBLIES
Fibrepulse is an approved manufacturer of Diamond E-2000 fibre optic cable assemblies. The E-2000 fibre optic connector system has been developed to cover all the requirements of Telecommunication, CATV and LAN applications, including FITL, FTTH and FTTD. The connector features a core-aligned ferrule for optimum performance.

FEATURES
· Low insertion loss
· Low backreflection
· Pull-proof connector
· Spring-loaded protective cap
· Standards:

· EN 86 275-801
· EN 86 275-802
· IEC 61754-15

· Available PC and APC
· SMF-28 fibre or equivalent

SPECIFICATIONS CHARACTERISTICS
Insertion Loss (1300nm and 1550nm)
0.10dB max
IEC-61300-3-4 Method B
· 100% tested for insertion loss and return loss.
  Results recorded
· Manufactured under Diamond approval
Return Loss (1300nm and 1550nm)
>65dB min (APC) ; >50dB (PC)
IEC-61300-3-6
· Tracability serial number on every cable assembly
· Cable - connector retention >150N
End-face Geometry
Radius of curvature (R): 10mm - 30mm
Apex Offset: <62.5 microns
Fibre Height: 0 - 500nm
· Operating temperature: -40°C/+85°


PRODUCTS
E2000 Patchcords and pigtails terminated on the following cable sizes:
(PVC jacket as standard. LSZH available on request)


CODE
CABLE TYPE (SINGLEMODE)
16
250µm (primary coated) Fibre
11
900µm (secondary coated) fibre
10
1.6mm Duplex Fig. 8 zipcord
07
2.0mm Simplex
13
2.0mm Duplex Fig. 8 zipcord
01
3.0mm Simplex
06
3.0mm Duplex Fig. 8 zipcord
17
8 fibre breakout (2mm sub-units)
18
16 fibre breakout (2mm sub-units)
XX
Custom cable types upon request


Castlebar Technology Park,
Moneen, Castlebar, Co. Mayo, Ireland
Tel: +353 94 9027822 Fax: +353 94 9027811
E-Mail: info@fibrepulse.com