MU SINGLEMODE ASSEMBLIES
Fibrepulse cable assemblies are manufactured using a patented assembly process, which reduces stress caused by traditional assembly processes. The benefits are best seen when the assemblies are used at higher wavelengths and for DWDM applications. All assemblies are made to UPC standard regardless of the application, allowing them to meet future application requirements.

FEATURES
· Low insertion loss
· Low backreflection
· Pull-proof connector
· Compatible with NTT-MU hardware
  Compliant with NTT and JIS specifications
· UL-rated plastic housing, boot and cable

· SMF-28 fibre or equivalent


SPECIFICATIONS CHARACTERISTICS
Insertion Loss (1300nm and 1550nm)
0.30dB max; <0.10dB Typ.
IEC 61300-3-4 method B
· 100% tested for insertion loss and return loss.
  Results recorded
· 100% interferometer testing. Results recorded
Return Loss (1300nm and 1550nm)
>50dB min.; >55dB Typ.
IEC 61300-3-6
· Tracability serial number on every cable assembly
· Cable - connector retention >100N
End-face Geometry
Radius of curvature: 7mm - 24mm
Apex Offset: <50 microns
Fibre Height: -0.02R³ + 1.3R²- 31R + 325
(Max. undercut 125nm)

 

 


PRODUCTS
MU Patchcords and pigtails terminated on the following cable sizes:

CODE
CABLE TYPE (SINGLEMODE)
16
250µm (primary coated) Fibre
11
900µm (secondary coated) fibre
10
1.6mm Duplex Fig. 8 zipcord
07
2.0mm Simplex
13
2.0mm Duplex Fig. 8 zipcord
17
8 fibre breakout (2mm sub-units)
18
16 fibre breakout (2mm sub-units)
XX
Custom cable types upon request


Castlebar Technology Park,
Moneen, Castlebar, Co. Mayo, Ireland
Tel: +353 94 9027822 Fax: +353 94 9027811
E-Mail: info@fibrepulse.com