PRODUCTS - DIN 47256 (LSA) SINGLEMODE ASSEMBLIES

Fibrepulse cable assemblies are manufactured using a patented assembly process, which reduces stress caused by traditional assembly processes. The benefits are best seen when the assemblies are used at higher wavelengths and for DWDM applications. All assemblies are made to UPC standard regardless of the application, allowing them to meet future application requirements. All DIN assemblies use pull-proof zirconia connectors.

FEATURES
  • Low insertion loss
  • Low backreflection
  • Pull-proof connector
  • Compatible with DIN 47256
  • Corrosion resistant body
  • Precision anti-rotation key
  • SMF-28 fibre or equivalent

SPECIFICATIONS CHARACTERISTICS
  • Insertion Loss (1300nm and 1550nm)
    0.30dB max; < 0.10dB Typ.
    IEC-61300-3-4 Method B
  • Return Loss (1300nm and 1550nm)
    >55dB min
    IEC-61300-3-6
  • End-face Geometry
    Radius of curvature (R): 10mm - 24mm
    Apex Offset: <50 microns
    Fibre Height: -0.02R³ + 1.3R²- 31R + 325
  • 100% tested for insertion loss and return loss.
  • 100% interferometer testing. Results recorded
  • Tracability serial number on every cable assembly
  • Cable - connector retention >150N
  • Operating temperature: -40°C/+85°
  • Mechanical endurance: 1000 cycles

 

Castlebar Technology Park,
Moneen, Castlebar, Co. Mayo, Ireland
Tel: +353 94 27822 Fax: +353 9427811
E-Mail: info@fibrepulse.com