 PRODUCTS
- FC SINGLEMODE ASSEMBLIES |
|
Fibrepulse cable assemblies are manufactured using a patented assembly process, which reduces stress caused by traditional assembly processes. The benefits are best seen when the assemblies are used at higher wavelengths and for DWDM applications. All assemblies are made to UPC standard regardless of the application, allowing them to meet future application requirements. All FC assemblies use pull-proof zirconia connectors with an adjustable key.
| FEATURES |
- Compatible with NTT-FC hardware
- Compliant with ANSI, Bellcore,
IEC, NTT,
TIA/EIA and JIS.
- Precision anti-rotation key
- SMF-28 fibre or equivalent
|
 |
| SPECIFICATIONS |
CHARACTERISTICS |
- Insertion Loss
(1300nm and 1550nm)
0.30dB max; < 0.15dB Typ.
IEC-61300-3-4 Method B
- Return Loss
(1300nm and 1550nm)
>50dB min.; >55dB Typ.
IEC-61300-3-6
- End-face Geometry
Radius of curvature (R): 10mm - 24mm
Apex Offset: <50 microns
Fibre Height: -0.02R³ + 1.3R²- 31R + 325
|
- 100% tested for insertion loss
and return loss.
- 100% interferometer testing.
Results recorded
- Tracability serial number on
every cable assembly
- Cable – connector retention
>150N
- Operating temperature: -40°C/+85°
- Mechanical endurance: 1000
cycles
|
|
|
|
 |
 |
|
Castlebar
Technology Park,
Moneen, Castlebar, Co. Mayo, Ireland
Tel: +353 94 27822 Fax: +353 9427811
E-Mail: info@fibrepulse.com
|
|
