|
Fibrepulse cable assemblies are manufactured using a patented assembly process, which reduces stress caused by traditional assembly processes. The benefits are best seen when the assemblies are used at higher wavelengths and for DWDM applications. All assemblies are made to UPC standard regardless of the application, allowing them to meet future application requirements.
| FEATURES |
- Compatible with NTT-MU hardware
- Compliant with NTT and JIS
specifications
- UL-rated plastic housing, boot
and cable
- SMF-28 fibre or equivalent
|
 |
| SPECIFICATIONS |
CHARACTERISTICS |
- Insertion Loss
(1300nm and 1550nm)
0.30dB max; <0.10dB Typ.
IEC 61300-3-4 method B
- [if !supReturn Loss
(1300nm and 1550nm)
>50dB min.; >55dB Typ.
IEC 61300-3-6
- End-face Geometry
Radius of curvature: 7mm - 24mm
Apex Offset: <50 microns
Fibre Height: -0.02R³ + 1.3R²- 31R + 325
(Max. undercut 125nm)
|
- 100% tested for insertion loss
and return loss.
Results recorded
- 100% interferometer testing.
Results recorded
- Tracability serial number on
every cable assembly
- Cable – connector retention
>100N
|
| PRODUCTS |
MU
Patchcords and pigtails terminated on the following cable sizes:
|
CODE
|
CABLE
TYPE (SINGLEMODE) |
|
16
|
250µm (primary coated) Fibre |
|
11
|
900µm
(secondary coated) fibre |
|
10
|
1.6mm
Duplex Fig. 8 zipcord |
|
07
|
2.0mm
Simplex |
|
13
|
2.0mm
Duplex Fig. 8 zipcord |
|
17
|
8
fibre breakout (2mm sub-units) |
|
18
|
16
fibre breakout (2mm sub-units) |
|
XX
|
Custom
cable types upon request |
|
|
