|
Fibrepulse cable assemblies are manufactured using a patented assembly process, which reduces stress caused by traditional assembly processes. The benefits are best seen when the assemblies are used at higher wavelengths and for DWDM applications. All assemblies are made to UPC standard regardless of the application, allowing them to meet future application requirements.
| FEATURES |
- STI, STII, STII+ and beST available
- Compliant with Bellcore, IEC
and TIA/EIA.
- Precision anti-rotation key
- SMF-28 fibre or equivalent
|
 |
| SPECIFICATIONS |
CHARACTERISTICS |
- Insertion Loss
(1300nm and 1550nm)
0.50dB max; <0.15dB Typ.
IEC-61300-3-4 Method B
- Return Loss
(1300nm and 1550nm)
>50dB min.; >55dB Typ.
IEC-61300-3-6
- End-face Geometry
Radius of curvature (R): 10mm - 24mm
Apex Offset: <50 microns
Fibre Height: -0.02R³ + 1.3R²- 31R + 325
|
- 100% tested for insertion loss
and return loss.
Results recorded
- 100% interferometer testing.
Results recorded
- Tracability serial number on
every cable assembly
- Cable – connector retention
>150N (3mm cable)
- Operating temperature: -40°C/+85°
- Mechanical Endurance: 1000
cycles
|
| PRODUCTS |
ST
Patchcords and pigtails terminated on the following cable sizes:
(PVC jacket as standard. LSZH available on request)
|
CODE
|
CABLE
TYPE (SINGLEMODE) |
|
16
|
250µm (primary coated) Fibre |
|
11
|
900µm
(secondary coated) fibre |
|
10
|
1.6mm
Duplex Fig. 8 zipcord |
|
07
|
2.0mm
Simplex |
|
13
|
2.0mm
Duplex Fig. 8 zipcord |
|
01
|
3.0mm
Simplex |
|
06
|
3.0mm
Duplex Fig. 8 zipcord |
|
17
|
8
fibre breakout (2mm sub-units) |
|
18
|
16
fibre breakout (2mm sub-units) |
|
XX
|
Custom
cable types upon request |
|
|
