|
Fibrepulse is an approved manufacturer of Diamond E-2000 cable assemblies. The E-2000 fibre optic connector system has been developed to cover all the requirements of Telecommunication, CATV and LAN applications, including FITL, FTTH and FTTD. The connector features a core-aligned ferrule for optimum performance.
| FEATURES |
- Spring-loaded protective cap
- Standards:
- EN 86 275-801
- EN 86 275-802
- IEC 61754-15
- Available PC and APC
- SMF-28 fibre or equivalent
|
 |
| SPECIFICATIONS |
CHARACTERISTICS |
- Return Loss (1300nm and 1550nm)
>65dB min (APC) ; >50dB (PC)
IEC-61300-3-6
- End-face Geometry
Radius of curvature (R): 10mm - 30mm
Apex Offset: <62.5 microns
Fibre Height: 0 - 500nm
|
- 100% tested for insertion loss
and return loss.
Results recorded
- Manufactured under Diamond
approval
- Tracability serial number on
every cable assembly
- Cable – connector retention
>150N
- Operating temperature: -40°C/+85°
|
| PRODUCTS |
E2000
Patchcords and pigtails terminated on the following cable sizes:
(PVC jacket as standard. LSZH available on request)
|
CODE
|
CABLE
TYPE (SINGLEMODE) |
|
16
|
250µm (primary coated) Fibre |
|
11
|
900µm
(secondary coated) fibre |
|
10
|
1.6mm
Duplex Fig. 8 zipcord |
|
07
|
2.0mm
Simplex |
|
13
|
2.0mm
Duplex Fig. 8 zipcord |
|
01
|
3.0mm
Simplex |
|
06
|
3.0mm
Duplex Fig. 8 zipcord |
|
17
|
8
fibre breakout (2mm sub-units) |
|
18
|
16
fibre breakout (2mm sub-units) |
|
XX
|
Custom
cable types upon request |
|
|
