| ST
SINGLEMODE ASSEMBLIES |
| Fibrepulse
cable assemblies are manufactured using a patented assembly process,
which reduces stress caused by traditional assembly processes. The
benefits are best seen when the assemblies are used at higher wavelengths
and for DWDM applications. All assemblies are made to UPC standard
regardless of the application, allowing them to meet future application
requirements. |
| FEATURES |
|
·
Low insertion loss
|
 |
| ·
Low backreflection |
| ·
STI, STII, STII+ and beST available |
| ·
Compliant with Bellcore, IEC and TIA/EIA. |
| ·
Corrosion resistant body |
|
·
Precision anti-rotation key
|
| ·
SMF-28 fibre or equivalent |
| |
| SPECIFICATIONS |
CHARACTERISTICS |
Insertion
Loss (1300nm and 1550nm)
0.50dB max; <0.15dB Typ.
IEC-61300-3-4 Method B
|
·
100% tested for insertion loss and return loss.
Results recorded |
| ·
100% interferometer testing. Results recorded |
Return
Loss (1300nm and 1550nm)
>50dB min.; >55dB Typ.
IEC-61300-3-6
|
·
Tracability serial number on every cable assembly |
| ·
Cable - connector retention >150N (3mm cable) |
End-face
Geometry
Radius of curvature (R): 10mm - 24mm
Apex Offset: <50 microns
Fibre Height: -0.02R³ + 1.3R²- 31R + 325
|
·
Operating temperature: -40°C/+85° |
| ·
Mechanical Endurance: 1000 cycles |
| PRODUCTS |
E2000
Patchcords and pigtails terminated on the following cable sizes:
(PVC jacket as standard. LSZH available on request)
|
CODE
|
CABLE
TYPE (SINGLEMODE) |
|
16
|
250µm (primary coated) Fibre |
|
11
|
900µm
(secondary coated) fibre |
|
10
|
1.6mm
Duplex Fig. 8 zipcord |
|
07
|
2.0mm
Simplex |
|
13
|
2.0mm
Duplex Fig. 8 zipcord |
|
01
|
3.0mm
Simplex |
|
06
|
3.0mm
Duplex Fig. 8 zipcord |
|
17
|
8
fibre breakout (2mm sub-units) |
|
18
|
16
fibre breakout (2mm sub-units) |
|
XX
|
Custom
cable types upon request |
|
 |
 |
|
Castlebar
Technology Park,
Moneen, Castlebar, Co. Mayo, Ireland
Tel: +353 94 9027822 Fax: +353 94 9027811
E-Mail: info@fibrepulse.com
|
|
